PALLET TRUCK

BOXES

The pallet truck box can be attached on both sides of the truck.
Suitable for practically every type of pallet truck. Reinforced floor (by means of a rectangular hollow steel) without sill.
Lid completely made of stainless steel and reinforced with ramp.
Both side walls have a slot for sticking through a control lever; the unused slot can be sealed with a plate which can be supplied. The used slot is sealed with two brushes.
Box is composed of 2 mm zincor plate black powder coated RAL 9011, the lid is made of brushed stainless steel, with two square 7 locks.
The pallet truck box can also be made entirely of stainless steel.

Anker 1

Pallet truck box with backwards protruding spoon compartment for the left or right side, allowing the control lever to remain in the box.
There will be room next to the pallet truck for batteries, tools, etc.
Suitable for practically every type of pallet truck. Reinforced floor (by means of a rectangular hollow steel) without sill.
Lid completely made of stainless steel and reinforced with ramp, fitted with an additional hinge.
Box is composed of 2 mm zincor plate black powder coated RAL 9011, the lid is made of brushed stainless steel, with two square 7 locks.
The pallet truck box can also be made entirely of stainless steel.

Anker 2

Anker 3

Pneumatic movable box for electrically driven pallet truck. The box is hanging from a suspension frame which hinges on the backside. The front side can be lifted and lowered with 2 air bellows, creating a sufficiently low ramp in the lowest position with an opened lid, allowing the pallet truck to be driven in and out. In the highest position the box is automatically locked. The upward movement is handled with a control lever.
The inside of the lid is fitted with checkerplate.
The lid can be closed with locking pins Mounting can be done by attaching the mounting frame to the chassis with sufficiently strong profiles.
The control valve is fitted with a hose of synthetic material for attaching an air pressure system.
The pallet truck box has a limited build-in depth which makes it suitable for mounting on trailers and trucks.